节约资源是我国长期的国策

从技术改造、循环经济、防污治污、政策支持、综合利用、可再生能源等方面推进能源资源节约,这既是缓解能源资源供求矛盾的重大举措,也是从源头上减少污染、改善生态环境的重要途径.     

Structural Characteristics and Mechanical Properties of Rock Mass in the Field of Tianwan Nuclear Power Plant, China

Introduction The project of Tianwan Nuclear Power Plant,located in Pashan, at the south foot of HouyuntaiMount, northeast of Lianyungang City, JiangsuProvince, is entitled State Key Project in collabo-ration with Russia. This project is carried out atthree phases, with two reactors to be built at eachphase. Important constructions such as the nuclearislets and the normal islets are all situated at thebedrock zone. With regard to the field study of thenuclear power plant, the authors have…     

沥青混合料生产质量影响因素分析

本文通过工地的调研和实践,探讨了集料生产与管理以及拌和楼调试对沥青混合料生产质量的影响。结果表明,确保集料规格的稳定性和除尘的连续性有益于沥青混合料的质量,在稳定冷料的情况下,才能正确调试热料仓配合比。同时本研究也表明,较大的最小筛孔布置以及较小的产量有利于除尘效率的提高。     

沉船打捞是海事执法中的热点与难点

结合工作实际详细解读沉船打捞工作中的疑难问题,并提出合理建议。     

铁路专用线选线控制因素分析

为系统分析出铁路专用线选线时各种控制要素,尝试探寻铁路专用线选线的独特规律,通过对铁路专用线选线功能及作用的分析,系统阐述铁路专用线选线时"路内"、"路外"各种控制要素和关键优缺点,同时理论与实践相结合,以华能铜川电厂铁路专用线工程为实例,对铁路专用线选线时涉及的运输通道、技术标准、接轨方案等进行多角度比选分析,使推荐的线路方案满足各方需求,工程合理可行。铁路专用线选线与国铁干线选线相比,既有着相同的特点也有着独特的考虑因素,为铁路专用线选线提供系统、全面、科学的控制因素及比选方法。     

间歇式沥青混凝土搅拌设备验收方法的确定

沥青搅拌设备整机验收一般应针对主要作业性能指标进行。科学合理地确定验收项目及验收依据是验收工作的关键，根据实践经验，提出了一套切实有效的验收方法。     

沥青混凝土摊铺机熨平板与热沥青混合料相互作用的动力学模型

在介绍了沥青混凝土摊铺机熨平板与热沥青混合料相互作用的特点后，叙述了热沥青混合料的流变特性，并给出了流变模型，就此得出了熨平板与沥青混合料相互作用的三种动力学模型。     

通苏嘉甬高速铁路跨杭州湾通道选择及桥位论证

通苏嘉甬高速铁路在嘉兴和宁波间需跨越杭州湾,杭州湾海域及两岸建设条件复杂、控制因素众多。开展跨杭州湾通道选择及桥位论证,对项目决策、建设和运营至关重要。在以往工程经验的基础上,从区域社会经济特征、区域交通现状及规划、气象水文地质等自然条件、港口航道和海事管控要求、秦山核电站及生态环境敏感区、防洪和涌潮影响规定等方面,详细梳理跨杭州湾通道的重要控制因素;在对4条跨杭州湾通道进行综合比选后,选择海盐西通道为推荐方案,并从河道演变、表流迹线等自然条件,港区规划,与港口作业区及锚地的安全距离,通航规范及航道通航影响评价要求,与上下游构筑物间距等方面,充分论证在该通道建设铁路跨海大桥的适应性和合理性。     

海洋石油平台余热利用研究

东海某DPP平台投产近十五年后,出现设备老化、工艺系统处理量发生变化等情况,从而透平电站、热油锅炉和工艺处理系统出现余热,如何减少能源浪费,及时有效回收利用,需要及时解决问题。通过对基础资料分析研究、平台生产实地调研,提出余热利用方案,并进行成本投资/回报比较,最终验证了方案的正确性。     

A stochastic optimization approach for the selection of reflective cracking mitigation techniques

PurposeIn Hot Mix Asphalt (HMA) overlays, the existing cracks in the underlying pavements can propagate upward to the new added overlay and may cause Reflective Cracks (RC). These cracks allow water infiltration to the underlying layers and causes further moisture damage as well as weakening the unbound layers. Over the years, several methods have been developed for mitigating the RCs. This study aims to investigate the current reflective cracking mitigation methods and develop a methodology for the selection of appropriate mitigation technique. The developed model is then applied to a case study in the state of Florida.MethodTo accomplish this goal, a nationwide literature review was conducted to better understand the current in practice methods in the United States. Moreover, a life cycle cost analysis (LCCA) in five different road types was performed to find the annuity of roadway rehabilitation for each of the mitigation methods. The uncertainty in the LCCA results is represented using Exploratory Modeling and Analysis (EMA) method. Then through a Multi Criteria Decision Making (MCDM) model, a stochastic optimization model was developed to find the appropriate reflective cracking mitigation solution under Florida’s climate and road conditions, based on different cost and performance weights.ResultsBased on the available data for the state of Florida, the LCCA results indicate that the annuity of maintaining the roadway with Fabrics and ISAC are lower compared to other methods. However, the results of stochastic optimization model reveal that while looking at the performance and cost at the same time, different methods would be more feasible. For instance, while the cost of the used method does not matter at all and only performance matters, STRATA® is more probable to be the appropriate mitigation technique. The findings of this research are critical for decision makers to better understand the most cost-effective mitigation technique in different conditions.